Bridge Type High Speed Machining Centers
Double Column High Speed 5-axis Machining Centers High Speed 5-axis Machining Centers High Speed Engraving Milling Machining High Speed Machining Centers Double Column High Speed Machining Centers High Speed Engraving Milling Machining CNC Milling Machining manufacturer 5-axis Machining Centers
High Speed 5-axis Machining Centers

 
V1160(A) / V1360(A) Series  
 

The V series vertical machining center from ES Corporation offers extraordinary stability and heavy-duty cutting capabilities.
ESPEED VMC's have won a high reputation from domestic and international customers.

   

 High Speed 5-axis Machine

 High Speed Machining Centers


Features:
  1. Box ways on three axes. The major structural parts, such as the spindle stock, saddle, base, table and column are manufactured from Meehanite (FC30) cast iron and stress relieved to ensure consistent machine accuracy and rigidity.
     
  2. The table is fully supported on the entire stroke, assuring superior stability for heavy loads.
     
  3. The counter-balancing system on axes is equipped with two guide ways to avoid vibration during rapid traverse while providing and extremely fine machining surface effect.
     
  4. The spindle features a floating tool release design to prevent the spindle bearings from bumping during tool changing. This also extends the spindle service life and durability.
     
  5. The lubrication system for three axes employs a volumetric oil distributor, combined with well-arranged brass oil tubes uniform lubrication points and oil amount on the far and near ends. It fully eliminates the problems of uneven lubrication on all slideways .
     
  6. Class C3, pre-tensioned ballscrews on the three axes and double nuts, combined with pre-tensioned ballscrew supports at both ends, fully eliminate transmission backlash. Ballscrews have been subject to compensation for thermal growth errors to assure high positioning accuracy and repeatability.
     
  7. The bearing arrangements on the X and Y axes are three at the front and two at the rear. On the Z-axis there are three bearings at the upper end and two at the lower.
     
  8. The pneumatic system parts, F.R.L. combination unit and solenoid valves employ American Parker brand and French Legris air hoses featuring minimum trouble and long service life.
     
  9. The counter-balancing system is equipped with Japanese-made TYC BL634 silent  chains which greatly extend service life.


Accuracy, Speed, responsibility and Service to Customers
   
   
   

CNC Vertical Machining Centers

Double Column High Speed 5-axis Machining Centers

  • PRECISION SPINDLE
    The spindle is mounted in P4 combination-type angular contact ball bearings for superior axial and radial thrust capabilities.

  • Z.F Hi/Lo Gearbox (Optional)
     

Bridge Type High Speed Machining Centers

Vertical Machining Center

  • QC
    Machines are 100% HP laser inspected and ball bar tested before positioning accuracy and fine servo-tuning.
     

 
 
 
 

Double Column High Speed 5-axis Machining Centers 5-axis Machining Centers

  • Armless ATC
    Armless type ATC system is driven by pneumatic system.
  • Arm ATC (Optional)
    Tool magazine has a capacity of 24 tools to meet various machining requirements; tools can be loaded and unloaded easily. Random tool access editing simplifies the registration and control of tools.
     

High Speed 5-axis Machine High Speed Engraving Milling Machining

Vertical Machining Center High Speed 5-axis Machining Centers

  • 3-axis servo motors are directly coupled to the ballscrews. It ensures the least backlash and long-lasting accuracy.
  • Floating drawbar design
    Floating drawbar design is to avoid damaging spindle bearing during changing tools.

High Speed Machining Centers Bridge Type High Speed Machining Centers

  • Adopts the equal arrangement of the oil points for the volume-type distributors. It results in oil spreading evenly on all sliding surfaces.

Outstanding Performance, High Speed CNC Controllers  

FANUC
CNC Vertical Machining Centers CNC Milling Machining manufacturer

High Speed Machining Centers Double Column High Speed Machining Centers
SIEMENS

5-axis Machining Centers
MITSUBISHI
  • Auger Type Swarf Conveyor (Optional)
    Powerful auger type swarf removes swarf quickly and easily.

   
Specifications:    
Model V1160 (A) V1360 (A)
Travel    
X-axis travel 1100 mm 1300 mm
Y-axis travel 600 mm 650 mm
Z-axis travel 600 mm
Spindle nose to table surface 120-720 mm
Table    
Table working surface 1250 × 650 mm 1450 × 650 mm
Max.loading capacity 880 kg 1000 kg
T-slots ( No.× W × P ) 5 × 18 × 125 mm
Spindle    
Spindle speed 8,000rpm ( 10,000 / 12,000rpm opt. )
Belt-drive
Spindle drive motor 11 kw
Spindle taper hole BT-40
Feederate    
X / Y / Z Rapid traverse 18 / 18 / 15 M/min
MAX. Cutting rate 1-10,000 m/min
A.T.C.    
Tool storing capacity 16 Tools (24e)
Type Armless (Arm)
Tool storing MAS BT-40
Pull stud P40 T-1 (45°)
MAX. Tool Lenght 300 mm
MAX. Tool Dimension Ø100mm (Ø150mm)
MAX. Tool Weight 7 kg
Machine Size    
Dimension ( L × W × H ) 2890 × 2240 × 2600 mm 3650 × 2240 × 2600 mm
Weight 7500 kg 8,000 kg
Power required 20 KVA 30 KVA
Air required 6 kgf/cm2
* We reserve the right to change design, color or specification without notice.
  High Speed Engraving Milling MachiningStandard Accessories
  • Mitsubishi M64 SM controller
  • Coolant system
  • Fully-enclosed splash guard
  • Auto lube system
  • Spindle air blast
  • Work light
  • Tool kit
  • Leveling kit
  • Telescopic covers for X,Y,Z axes
  • M30 auto power off
  • Heat exchanger on cabinet
  • Alarm light

     
  Optional Accessories
  • High Speed 5-axis Machining CentersSpindle oil cooling device
  • 4th axis NC rotary table
  • Coolant through spindle
  • Inventor 220V-380V-400V-440V
  • Lift-up swarf conveyor
  • CE marking
  • Alarm beeper
  • ZF Hi/Lo Gearbox
  • Oil skimmer
  • X,Y,Z axis linear scale
  • Screw type chip conveyor

 

   
   
   
 
  Back TOP
 
High Speed Machining Centers
No.1-6, Jhongjheng Rd., Dyay Township, Taichung County 428, Taiwan.  
TEL: +886-4-2533-8767   FAX: +886-4-2532-7691  
http://www.twespeed.com.tw    E-mail: twe.speed@msa.hinet.net  

Sitemap 5-axis Machining Centers  High Speed Machining Centers